SX460 Automatic Voltage Regulator Generator Automatic Voltage Regulator Diesel Alternator Voltage Stabilizer Electric Generator Power Parts(PINS)

Voltage RegulatorsSX460 Automatic Voltage Regulator Pressure RegulatorWIRING (Refer to wiring diagram)1. ConnectF1, F2 to DC output port.2. Connect the sensing port at 7, 8 (the setupis 220V, if 110V is required, please join 3, 4)3. External voltage regulator is as Figure 4.4. Connect a jumper from COM to the 50Hz terminal for 50Hz operation.Note :please install 5A 250V fuse at power input portas Figure 4WARNING:This Automatic Voltage Regulator is not equipped with loss-SensingProtection function /Over Excitation Protection. An additional Over-Voltage Protection device for load may be required to avoid possible damage to the equipment or severe personalinjury or death.Weight:243g t 2%Dimensions:135mmL*100mmW*49mmHSoft Start Ramp Time:2 sec.( UFRO ): Slope 170% down to 30 HzUnder Frequency Protection:Set point ,95% HzUnit Power Dissipationt:Max.10 wattExternal Volts Adjustment:7% with 1K ohm 1 watt trimmerThermal Drift:0.05% per C change in Automatic Voltage Regulator ambientVoltage Build-up:Residual voltage at Automatic Voltage Regulator terminal> 5 VAC<;+ 1.5% ( with 4% engine governing )Voltage RegulationResistance:Min.15 ohmCurrent:Continuous 4A ,Intermittent 10A for 10 sec.Voltage:Max. 90 VDC @ 207 VACOutputFrequency:50160 Hz, selectableVoltage:95~132VACor190~264VAC1 phase, jumper selectableNSensing Input1. INTRODUCTIO

• Voltage Regulators
• SX460 Automatic Voltage Regulator Generator Automatic Voltage Regulator Diesel Alternator Voltage Stabilizer Electric Generator Power Parts